Find a depot

Jacking

Low Height Jacks

Our low height jacks have been specifically designed to lift loads where headroom is limited. With a closed height of 60-192mm, the low profile cylinder is able to hold loads very low to the ground.

The low height cylinders have a screw ram and locking collar which makes them ideal for use on bridge bearing replacement. We supply low height jacks with varying cylinder capacities available from 50 – 520 tonnes, dependent on your application.

Low Height Jacks used for lifting building sections and bridges
Low Height Jacks used for lifting building sections and bridges

Features

50- 520 tonnes cylinder capacity
Locking collars
Load bearing capacity: 490kN - 5101kN
Stroke limit 12mm – 45mm
Can be computer controlled with our advanced Monitoring solutions

About Low Height Jacks

Our low height jacks are the ideal solution for situations where there is low ground clearance. Our low height hydraulic cylinders provide the maximum power to height ratio in confined spaces, with an impressive load bearing capacity of 490kN to 5101kN.

All our Low Height Jacks are tested, certified and calibrated by our in-house hydraulics experts before every hire. If required, our hydraulics team will also install and operate the jacks for your project.

Available to straight hire or as part of a design.

Low height hydraulic jacks are generally used in a variety of applications:

  • Bridge Jacking
  • Building Refurbishment
  • Monitoring and control
  • Site Services

Resources

View or download here

    • Capacity (kN)

      490-5101

      Stroke (mm)

      12-45

      Closed height (mm)

      60-192

      Diameter (mm)

      175-400

Our Jack range

We have a full range of jacking equipment to accompany our low profile cylinder jacks, available for low to high load capacities. Find the perfect jacking solution for your project.

*
Plain Ram Jacks
Plain Ram Jacks
*
Hymat Jacks
Hymat Jacks
*
Screwed Ram Jacks
Screwed Ram Jacks
*
Hollow Ram Jacks
Hollow Ram Jacks
*
Climbing Jacks
Climbing Jacks
*
Flat Jacks
Flat Jacks

Get in touch with us

Give us a call

For all low profile cylinder, project specific design and technical enquiries, please contact your local service team. Find your local depot to get in touch.

  • {{ title }}

    • Send us an email

    Have a question about low height hydraulic jacks? Simply send us an email and a brief outline of how we can help and we'll be in touch.

    [email protected]

    It looks like you are working with our

    So that we can assist you further, could you share a few details and your download will start straight away.