Remote Structural Monitoring (DMS System)

Fixed Structural Monitoring (DMS System)

What is the dynamic monitoring station (DMS)?

The dynamic monitoring station (DMS) is a multi-point remote monitoring system that measures the dynamic movement of civil and geotechnical structures through 3D measurement. It assesses position (displacement, distance), strain (expansion, contraction, crack opening) and rotation (twist, tilt and bending) of a structure with no physical sensors required.

How does the dynamic monitoring station work?

The DMS system uses video-based technology to take frequent, highly accurate, structural readings. It can be set up safely, out of the way and does not require targets to be put in place, but still typically has a resolution in excess of 1 part in 100,000 (if the camera can see a 10m section of roadway, resolution of greater than 0.1mm can be achieved).

Back to top

Key features and benefits

  • No need for direct structural assessment - eliminating project delays
  • Safer working environment - no requirement for employees to work at height or over water
  • Capable of more detailed investigation - simply highlight areas of interest
  • No need to fit targets - video gauge pattern recognition technology works on existing rivets, bolts, beams, masonry and concrete staining
  • Visible or IR lighting - allows monitoring to be done at night time

Applications

Back to top

Find out more about Mabey’s dynamic monitoring station.

Back to top

Also available:

Wireless Structural Monitoring

Wireless Structural Monitoring

The measurement of factors affecting a structure using sensors to transfer data wirelessly.

 

Wireless Load Monitoring

Wireless Load Monitoring - LIVEpin

The remote, continuous measurement and analysis of axial load on our groundworks propping equipment.

 

Computer Controlled Hydraulic Jacking

Computer Controlled Hydraulic Jacking

The ability to make use of multiple input sensors – controlling lifting, lowering and positioning of heavy structures.

Back to top

The preparation of any Engineering Scheme should be undertaken by a suitably
qualified, experienced and competent individual. If you are in any doubt about
any of the information provided on this website, please seek advice from
Mabey Hire Ltd and our engineering team will be pleased to assist.
Whilst every effort has been taken to ensure that the contents of this website
are correct, Mabey Hire Ltd cannot be held liable for any inaccuracies.
Mabey Hire’s policy is one of continual improvement. Before using technical
information it is the responsibility of the user to check that information
is current and has not been superseded or amended.

I have read and understood the above

Downloads

Back to top